default_mobilelogo

Kuntze Automatic Dosing Units

Disinfectant measures with open sensor reliable technology

Kuntze sensors provide constant and accurate measurement of disinfectants including hydrogen peroxide, chlorine free, ozone and chlorine dioxide. Their measurement works on a method called 'open sensor technology' which seamlessly integrates into existing systems used for measuring.

They can be controlled by software. Kuntze sensors are intended to eliminate membranes replacements,  reagents and electrolyte changes. Beyond that, no error-prone, mechanical moving parts are installed in Kuntze sensors.

The sensors are manufactured exclusively in Germany to the highest quality standards. This results in clear advantages in measurement accuracy and longevity compared to measurements with membrane-covered sensors and online colorimetric measurements. In combination with our proven Automatic Sensor Cleaning (ASR®), Kuntze sensors are reliable even in the most difficult water conditions.

Automatic Sensor Cleaning (ASR®)

The innovative Automatic Sensor Cleaning system ASR® keeps Kuntze products clean and ready for operation – without adding any chemicals. The patented, highly efficient cleaning process protects against contamination by manganese, iron, grease and lime. During the electrochemical cleaning, adherent deposits are blasted off, organic contaminants are eliminated by the created oxygen molecules, while rust and manganese are removed hydrogen. The cleaning intervals of Kuntze disinfectant sensors can be flexibly adjusted: Depending on the water conditions, you can choose whether cleaning should take place e.g. once or several times a week. The cleaning times are adjustable and can be set to non-critical times. Thus, Kuntze sensors adapt through ASR® to your individual measuring processes.

Benefits

  • ASR® significantly reduces maintenance and costs
  • Provides precise and reproducible material conditions for disinfectant measurement
  • Measurement integrity remains constant even in difficult water conditions

Free chlorine technology comparison chart

 
 
 
Benefits
  • Rapid sensor response
  • Best-in-class manual and ASR® patented Automatic Sensor Cleaning
  • Stable and accurate measurement even in challenging water conditions
  • No flexible membrane or electrolytic gel replacement
  • No reagents or consumable
  • No mechanical moving parts
  • Low lifecycle cost
 
 

Matching disinfectant measurement products

Krypton® Multi
 

Multi-channel water monitoring system for total chlorine, free chlorine, chlorine dioxide, ozone, or hydrogen peroxide measurement

The Krypton® Multi offers precise results in industrial disinfectant applications, e.g. in drinking water plants or food production, thanks to its multi-channel monitoring. The all-in-one system consists of a measuring device, multiple sensors running simultaneously, a flow fitting, software, and cables. In its basic standard configuration, the Krypton® Multi is equipped with three measurements: Disinfection, pH, and temperature. Additionally, a second disinfection, a redox and a conductivity measurement can be added. There are six digital inputs for external events. Eight potential-free output relays can be used either as control or alarm relays. The system features a PID controller and 3-point control functions available with or without feedback. Our modular Argon Stabiflow® fitting is integrated and provides a constant water flow of approx. 30 liters per hour, is brine resistant and approved for pressure up to 6 bar at a temperature of 20 °C.

The Krypton® Multi can be customized to meet your exact measurement and control requirements. With five analog outputs, our unique Automatic Sensor Cleaning (ASR®) as well as a Modbus RTU unit and a data logger are available as add-on modules. The measurement system can be digitally controlled and seamlessly integrated into an existing measurement infrastructure via our Cloud Connect® service. In addition, software updates and add-on modules can be activated at any time after purchase.

 
 
 
 

Single-channel water monitoring system for measuring free chlorine, chlorine dioxide, ozone, or hydrogen peroxide and temperature

The Krypton® DIS provides reliable measurement results for free chlorine, chlorine dioxide, ozone or hydrogen peroxide and measures the water temperature. The single-channel measurement and control system consists of a measuring device, a sensor, flow fittings, software, and cables. In the standard version, the Krypton® DIS is equipped with a disinfectant and temperature measurement. In addition, there is a digital input and an alarm relay. Our modular Argon Stabiflow® fitting is integrated and provides a constant water flow of approx. 30 liters per hour, is salt and pressure resistant up to 6 bar at a temperature of 20 °C. All measuring parameters and the measuring range can be selected directly via the system’s user interface.

The Krypton® DIS can be extended with additional analog outputs, concentration or volume based control functions, our Automatic Sensor Cleaning (ASR®) as well as a Modbus RTU unit, and a data logger. Full connectivity with an existing measurement infrastructure can be established via our Cloud Connect® service. In addition, software updates and add-on modules can be activated at any time after purchase.

Applications
 

Disinfection

Krypton® DIS Total
 

Single-channel water monitoring system for total chlorine and temperature measurement

The Krypton® DIS Total is our specialized system for reliable measurement of total chlorine (free and combined chlorine) and water temperature. The single-channel monitoring system consists of a measureing device, a sensor, flow fittings, software, and cables. In the standard version, the Krypton® DIS Total is equipped with a total chlorine and temperature measurement. In addition, there is a digital input and an alarm relay. Our patented, modular Argon Stabiflow® flow fitting is integrated and ensures a constant water flow of approx. 30 liters per hour, is salt and pressure resistant up to 6 bar at a temperature of 20 °C.

The Krypton® DIS Total can also be extended with additional analog outputs, concentration, or volume-based control functions, as well as a Modbus RTU unit and a data logger. Full connectivity with an existing measurement infrastructure can be established via our Cloud Connect® service. Software updates and add-on modules can be activated at any time after purchase.

 
 
 
 

Kuntze Cloud Connect®: Smart, remote water quality analysis

Anytime. Anywhere. On any device.

Connect your Kuntze products via our Cloud Connect® service and discover the possibilities of modern, remote water quality analysis. With our Cloud Connect® dashboard, keep an eye on all you data – in real time and on all devices. In-depth insights into current water quality make it easier to identify patterns and allow you to react faster to critical changes. This increases the efficiency and productivity of your measurement and monitoring activities while reducing maintenance costs.

The advantages of Kuntze Cloud Connect®:

  • Sensor and device locations are visualized in the Cloud Connect® dashboard
  • Centralized access to current measurement data, regardless of time, location, or device
  • “DPD2CC” mobil app: user-friendly, native application to store reference measurements, such as DPD,  in the cloud
  • Data-driven real-time analysis increases quality and speed for customers around the world